1. The charger can only charge Cylindrical lithium-ion and Ni-MH-battery, Lithium iron phosphate battery is unavailable.
2. Please refer to the instructions carefully before use, pay attention to the recommended battery charging current, do not exceed the recommended charging current.
3. It is better not to use other power adapter, we have more suitable adapter 12V 2A for the charger.
4.There is a littel fever when the charger is under the charging and discharging, but it is a normal phenomenon
5.Unplug the power and pull out the battery when you stop using the charger.
6. The product measured data just for referrence only.
7.there is a limite on the charger, please do not charge the battery and do the output current at the same time, we are now fixing this bug now, after 6 months later, our charger can not do the input and output currunt at the same time. and our charger does not a converter, it cant connect the power and the electronic products without putting the battery into the slots of the charger directly, please confirm the situation, and do not make any unnecessary problems.
8. If the output current does not reach more than 60ma, it will stop DC 5V output current
9. the slot of the charge can be fit with the 26650 battery, but the whole charger cant be fit with
4pcs 26650 battery, just can be fit with 2pcs at the same time, please keep inform, thank you.
10.The internal resistance detection mode is for reference only, The main function of the charger is to charge and detect the capacity
1. DC Input voltage: 12V / 2.0A
2. LI-ION battery charging current: 4.2 V 300mA / 500mA / 700mA / 1000mA
3. NiMH battery charging current: 1.48 300mA / 500mA / 700mA / 1000mA
4. Termination: Intelligent voltage monitoring
5. Size: 162 mm (length) * 96 mm (width) * 36 mm (height).
6.Charging cut-off voltage: lithium-ion battery 4.2v+-0.05v
7.Charging output: 500mA cutoff Li-ion 2.8v/NiMH 0.9v
8.USB output: 5V 1000mA(only with Li-ion 3.7v battery inserted)
9.For battery sizes: diameter 8mm-26mm; height 34mm-71mm
NiMH/Cd AAA/Microro AA/Mignon C/Bady Sub-C A
Li-ion: 26650/22650/18650/18490/18500/17500/17355/16340(RCR 123)/14500/10440
1.4 kinds of charging current regulator (mA / 500mA / 700mA / 1000mA);
1.The charger has six buttons, key mode (mode), the current selection key (NAP), and view the data independently selected key (1234), the use of simple and convenient;
2.Hold down the Mode key in any case, and for 3 seconds to change the fee (Free) mode or quick test No test (capacity test) mode, then press again the corresponding function keys can be changed within 8 seconds, Current, Independent , Hunchong, capacity test, the selected function after 8 seconds in a working condition, in working condition can press (1234) To view the current (MA) / Capacity (mAh) / Voltage (V) / Time (H) / Resistance (MR) data reference.
1.When power is on the charger, battery charger all instant full brightness LCD screen when the battery is not placed in the display Null, if it is a bad battery will also be displayed in the Null;
Russian Verson User Manual from friendly customer, please refference, thank you so much.
Connecting to the power, to open the Lii-500 charger, the screen as follows:
When power is on the charger, battery charger all instant full brightness LCD screen when the battery is not placed in the display Null, if it is a bad battery will also be displayed in the Null
In the charging mode (FREE) Within 8 seconds to change any of independent charging or other current selection, as well as various battery hunchong. Make a simple, 8 seconds, press the corresponding button battery 1234 Press the MODE button to change the mode, press the key to changing the current Independent, Hunchong, detection capacity, chosen after 8 seconds in the operation, attention to choose the size according to the current battery capacity charge, if not faster charging we recommend charging 500MA, This is the safest.
Fast test (rapid capacity test mode)
When the power is turned back into the charger, 8 seconds Touch (Key Mode Mode) Select (quick test quick capacity test mode), then press (current selection key CURREN) Select System 8 seconds after locking your choice to work. Quick Reference Table Capacity test procedure
Nor test (Normal capacity detection mode)
USB 5V Output Test
12V 2A Power Adapter
Liitokala Car Charger