|Body Material||Engineering Plastic|
|Water Spray Type||Fan|
|Interface Material||Engineering Plastic|
|Nozzle Material||Engineering Plastic|
|With Water Pipes||No|
|Handle Type||Finger Grip|
1, Due to the copper material, the hose barb and the reservoir box is easily out of shape during transport and it is difficult to be repaired.;
2, In the course of use the snow foam lance, if you incautiously drop it in the ground, the product will be easy to damage.
3, The copper rubs against the plastic bottle so that the screw thread of bottle is easy to damage.
a. high crystallinity and perfect melting point;
b. good surface hardness;
c. high abrasion resistance and tiny friction;
d. excellent self- lubricity and noise reduction;
e. work stable at low temperature and can work under 100℃;
f. non-toxic, odorless, non-rusty;
g. nonflammable and self-extinguishing;
h. good weather-resistance.2.The test shows that, compared with the copper one, the Nylon PA66reservoir box is more resistant of being squashed and more throw-proof for its special material.
3, TheNylon PA66reservoir boxis less abrasive to the bottle, the damage could be neglected in most cases.
4, The product is easier to pass the customs clearance procedure for the lighter weight.
Please pay attention, at present there are both the Nylon PA66
reservior box and the brass one,so we would send one of these two kinds by random.
In the future few months, we would only send you the plastic one. Thanks for understanding in advance.
please select the correct adapter before you order
KA means Karcher K Series.
This foam lance is with Metal Brass adapter and connection tube.
Actually, the plastic adapter is same durability as per the brass one.
You can get the very thick foam like the above photos if your pressure washer can create 150Bar pressure at least, and your cleaning shampoo is concentrate shampoo.
Advantage of MJJC FOAM LANCE:
1. 100% guaranteed to make thick and dense foam for all pressure washers.
2. both small and big commercial pressure washers can make thick and dense foam with the new design MJJC FOAM LANCE.
3. 45 days money back guaranteed for undelivery or defective quality.
4. Since now, we provide 6 months warranty guaranteed(except the mesh filter inside).
5. 100% after-sale service guaranteed forever.
As there are two kinds of adapters for this brand of pressure washers. Please check the photo of adapter size and make sure it fits your pressure washer before you order. We have shown the picture of adapter size on the product description, so we don\'t take any responsibility of incompatibility of your adapter if you made a wrong order.
If you need assistance for choosing the correct adapter, please feel free to contact us.
1. It makes soft fluffy snow foam, fun and simply.
2. It works with any pressure washers, small and big are all working perfectly.
3. It saves water, It’s eco-friendly.
4. It’s touch-less car wash, it saves your time and energy.
5. The thick foam suds melt rods and dirty on paint, thus it reduces swirl marks and scratches.
1. Put PTFE tape on the brass tube (two threads), each thread needs 50cm PTFE tape.
2. Put the fitting/adapter with brass tube and suction tube on foam lance unit.
3. Fill fluid bottle with desired amount of shampoo.
4. Fill fluid bottle with water (for best results, use warm water, 20% shampoo +80% water is suggested).
5. Shake the fluid bottle to mix the shampoo with water thoroughly.
6. Attach fluid bottle to foam lance unit.
7. Attach the fitting/adapter to pressure washer gun, and you can start playing with it.
New Heavy Duty Design, ideal for enthusiast or professional use.
Each Snow Foam Lance comes with Karcher K Adapter, Connection Tube, and PTFE tape.
Quality design and fittings provide excellent durablility for everyday usage.
Maximum Pressure 160 Bar.
Max Temp 60 Degrees
1/4″ Female inlet with 40MM Stainless Steel Extension Bar
Variable, adjustable Spray Nozzle for accurate mixing and foam generation.
Fully Adjustable dilution with setting dial.
1 litre container bottl
All of our connectors are made of quality brass to ensure quality fitment and Karcher fitments are made of quality hard wearing plastic
A: Normally the parcel will take 15-20 days to get to you, but sometimes it will take 2 months (Brazil may take 3 months) for something beyond our reach during transport. If you don’t get the parcel within 2 months, which seems that the parcel is lost or something else, you could open a dispute and we would refund to you.Hope for your understanding and thank you.
A: Yes, you could choose the shipping ways when you place the order. Thank you.
A: Sorry about this. All the prices on the page are the most favorable prices we could offer. But you could get some coupons on our store page. Thank you.
A: Don’t worry, normally it will take 5-20 working days to get the refund back. If not, you need to go ask the Customer Service for help. Thank you.
Q: Will our order be subject to customs duties? A: Each package may be subject to tariffs, and different tariff policies for different countries.However, local overseas warehouses (Russia, Spain, and the United States) will not be subject to customs duties.
Q: How much do you mark on the package? A: As usual, we cannot mark goods as gifts. Please note that there are four types of foam guns handled directly by the Aliexpress warehouse, so we cannot put a lower price on these packages. Thank you for your understanding. At the same time, the following countries can only apply for real prices: Australia, Indonesia, Israel, Japan, South Korea, Mexico, Russia, and the United States.
A: Yes, we could sell you those parts, but the price is nearly same as the one with the bottle. And there may occur that our foam lance could not fit in your bottle. So we suggest that you buy the whole foam lance. Thank you.
A: Yeah, we have the bottles without logo. If you order 2 pieces, we would send you the bottles with logo. Order amount over 12 pieces, we would send the bottles without our logo. If you want all the bottles with logo, please leave a note. Thanks for the understanding.
A: For this situation, you may need to pick up the parcel yourself at the local post office with the tracking number or ask the personnel there to help you track the parcel. So sorry for the inconvenience.
A: There will be a small nozzle screw(1.1mm) for the smaller pressure washers. If the foam lance is working well, then it doesn’t need to be replaced. Thank you.
A: The working pressure of our foam lance is between 100-168 bar.
A: Colorless stands for brass adapter. And the Black one stands for plastic adapter. Both of them are in the same size, they are just made of different material. So you could choose either one.
A: It takes time for the shipping company to track the goods and update the tracking information, especially when the goods is under transport to different transportation depots. Hope for your understanding.
A: Yes, please provide us your E-mail. We would send it to you. Thank you.