Select category
search

LiitoKala Lii-PD4 Lii-S6 Lii500s battery Charger for 18650 26650 21700 18350 AA AAA 3.7V/3.2V/1.2V/1.5V lithium NiMH battery

US $13.84
US $7.89

So, what we talk about?

Liitokala Lii-PD4 Chargerx1

AC Cable x1

Manual x1

Cautions

1.This charger can chargeallcylindricalrechargeablebatteries 3.7V Li-Ion, 3.8V IMR, 1.2V Ni-MH/Cd, 3.2VLiFePO4

2.Read this manual before use and pay special attention to the recommended charge current, must avoid to charge battery beyond the recommended current limit

3.If DC input, only 12V1Ais recommended

4.Mind heating while charging

5.Remove the charger from power source after charging complete, and remove the battery from the charger at the same time

6.For indoor use only

7.The displaying data only for reference, please refer to professional instrument for more accurate data

Specifications and functions

1.Multi-power input: AC cable 110-240V 50/60Hz (included)/ 12V 1A adapter(selective), four independent charging and micro computer management system.

2.Charge current intelligent auto-set of total three levels: 500mA /1000mA/2000mA),2000mA is fixed only for slot#4.

3.Multi-functionalLCDcharging display: for charging progress25% - 50% - 75% -100% , battery types: Ni-MH 1.2V , Li-Fe 3.2V, Li-ion 3.7V, Li-ion 3.80V (IMR), charging capacity, voltage and current: 0.5A/1A/2A.

4.Identify Li-ion and Ni-MH batteries automatically and adjust manually the charging mode for LiFePO4 and 3.80V li-ion batteries(IMR)

5.Refresh for OV battery. It will not charge any battery of1.65 -2.20V (refresh current can be detected only)

6.Multi-safety protection function of over-charge and over-discharge, short circuited, polarity reverse and so on. It can smartly identify broken batteries with much more safety.

7.Chargingat constant voltage and current

Button and LCD

1.Button of Mode(Channel button):there are 4 independent buttons separately for each channel.Whilepower supply is connected and battery inserted, 1)Short clickthe channel button in 5S to change the battery type. It will start to charge 5 seconds after setting the battery type (3.2V or 3.80V), 1.2V Ni-MH and 3.7V li-ion can be detected automatically, so it needs setting only 3.2V and 3.8V batteries;

Note: Battery type can be only selective before charging starts.

2.LCD: Whilepower supply connected,the LCDwilllight upfor 3S: 1) If no battery isinserted,the LCD will display“null” and will be off in 30S 2) When battery is inserted and detected,the LCD will show channel number while the battery type image“Li-Ion 3.7V”flashingindicatingto set the battery type: this momentifshort click the channel button, it can set battery type; ifno operation in5 seconds, it beginsbyautomatic detection(Li-Ion 3.7V or NIMH) then charging percentage image will flash meaning the start of charging. At the same time the LCD displays also charge voltage, capacity, time and current. When charge completes, it will display“100%”mean while it shows “End” on the LCD right down corner.

LCD displaygraphic reference

Cautions

1.This charger can chargeallcylindricalrechargeablebatteries 3.7V Li-Ion, 3.8V IMR, 1.2V Ni-MH/Cd, 3.2VLiFePO4

2.Read this manual before use and pay special attention to the recommended charge current, must avoid to charge battery beyond the recommended current limit

3.If DC input, only 12V1Ais recommended

4.Mind heating while charging

5.Remove the charger from power source after charging complete, and remove the battery from the charger at the same time

6.For indoor use only

7.The displaying data only for reference, please refer to professional instrument for more accurate data

Specifications and functions

1.Multi-power input: AC cable 110-240V 50/60Hz (included)/ 12V 1A adapter(selective), four independent charging and micro computer management system.

2.Charge current intelligent auto-set of total three levels: 500mA /1000mA/2000mA),2000mA is fixed only for slot#4.

3.Multi-functionalLCDcharging display: for charging progress25% - 50% - 75% -100% , battery types: Ni-MH 1.2V , Li-Fe 3.2V, Li-ion 3.7V, Li-ion 3.80V (IMR), charging capacity, voltage and current: 0.5A/1A/2A.

4.Identify Li-ion and Ni-MH batteries automatically and adjust manually the charging mode for LiFePO4 and 3.80V li-ion batteries(IMR)

5.Refresh for OV battery. It will not charge any battery of1.65 -2.20V (refresh current can be detected only)

6.Multi-safety protection function of over-charge and over-discharge, short circuited, polarity reverse and so on. It can smartly identify broken batteries with much more safety.

7.Chargingat constant voltage and current

Button and LCD

1.Button of Mode(Channel button):there are 4 independent buttons separately for each channel.Whilepower supply is connected and battery inserted, 1)Short clickthe channel button in 5S to change the battery type. It will start to charge 5 seconds after setting the battery type (3.2V or 3.80V), 1.2V Ni-MH and 3.7V li-ion can be detected automatically, so it needs setting only 3.2V and 3.8V batteries;

Note: Battery type can be only selective before charging starts.

2.LCD: Whilepower supply connected,the LCDwilllight upfor 3S: 1) If no battery isinserted,the LCD will display“null” and will be off in 30S 2) When battery is inserted and detected,the LCD will show channel number while the battery type image“Li-Ion 3.7V”flashingindicatingto set the battery type: this momentifshort click the channel button, it can set battery type; ifno operation in5 seconds, it beginsbyautomatic detection(Li-Ion 3.7V or NIMH) then charging percentage image will flash meaning the start of charging. At the same time the LCD displays also charge voltage, capacity, time and current. When charge completes, it will display“100%”mean while it shows “End” on the LCD right down corner.

LCD displaygraphic reference

Electrical Parameters

1. Input : AC cable 110-240V 50/60Hz (included)/ DC 12V 1A(selective)

2. Output voltage: DC 4.2V for Li-Ion 3.7V

DC 4.35V for Li-Ion 3.8V( IMR)

DC 3.65V for LiFePO4

DC 1.48V for NiMH/NI-Cd

3. Output current: Li-Ion/IMR/LiFePO4 2000mA*1(only for slot#4),

1000mA*2, 500mA*3 500mA*4

NiMH/NiCd: 1000mA*2, 500mA*3 500mA*4

4. Constant voltage, cut-off current: less than 100mA

5. Standby current: less than 15mA

Compatible battery types and sizes

Li-ion / IMR/LiFePO4: 26650,21700,20700, 18650, 18490, 18350, 17670, 17500, 16340(RCR123), 14500, 10440

NiMH/Cd: AA, AAA,SC, C

Size and weight

133mm x 100mm x 35mm (L x W x H)

Weight: approx175g (not including AC cable)

Electrical Parameters

1. Input : AC cable 110-240V 50/60Hz (included)/ DC 12V 1A(selective)

2. Output voltage: DC 4.2V for Li-Ion 3.7V

DC 4.35V for Li-Ion 3.8V( IMR)

DC 3.65V for LiFePO4

DC 1.48V for NiMH/NI-Cd

3. Output current: Li-Ion/IMR/LiFePO4 2000mA*1(only for slot#4),

1000mA*2, 500mA*3 500mA*4

NiMH/NiCd: 1000mA*2, 500mA*3 500mA*4

4. Constant voltage, cut-off current: less than 100mA

5. Standby current: less than 15mA

Compatible battery types and sizes

Li-ion / IMR/LiFePO4: 26650,21700,20700, 18650, 18490, 18350, 17670, 17500, 16340(RCR123), 14500, 10440

NiMH/Cd: AA, AAA,SC, C

Size and weight

133mm x 100mm x 35mm (L x W x H)

Weight: approx175g (not including AC cable)

Liitokala Lii-PL4 Chargerx1

AC Cable x1

Manual x1

Instruction manual Lii-PL4

Precautions

1. This charger can handle all cylindrical batteries 3.7V Li-ion, 3.8V IMR, 1.2V Ni-MH / Cd, 3.2VLiFePO4

2. Read this manual before use and pay special attention to the recommended charging current, needs to be above the recommended current limit

3. If DC input, only 12V 1A is recommended

4. Spirit heating during loading

5. Remove the charger from power source after charging finished, and remove the battery from the charger at the same time

6. for the interior only

7. The display data for reference only, please refer to professional instrument for more accurate data

specification and function

1. Multi-power input: AC cable 110-240V 50 / 60Hz (included) / 12V 1A adapter (selective), four independent and micro computer management system.

2. Three charging mode (500mAh / 1000mAh / 2000mAh, 2000mAh current mode is fixed only to the fourth slot.

3. The LED charging indicators: both for charging progress: 25% -50% -75% -100% and battery types: Ni-MH 1.2V, Li-Fe 3.2V, Li-ion 3.7V , Li-ion 3.80 V (IMR)

4. Automatically identify Li-ion and Ni-MH batteries and manually set the charging mode for LiFePO4 and 3.80V lithium ion batteries (IMR)

5. Upgrade for OV battery. there will be no battery of1.65-1.85V (refresh current can only be detected)

6. Protection for overcharge and over-discharge and short-circuit. identify broken battery and polar reverse polarity protection.

7. Charging under constant voltage and current

Button, LED and function

1. Keys: While power supply is connected, 1) Short press (less than 2S) to change the mode, the battery type. It will start to charge 5 seconds after the setting of the battery type (3.2V or 3, 80V), 1.2V Ni-Mh and 3.7V li-ion can be detected automatically, so it only needs adjustment of 3.2V and 3.8V batteries; 2) Change the charging current anytime during the charging process by pressing long (more than 2s) the mode button

2. LED: While power is plugged in, all LEDs light immediately 1) If no battery is inserted, the 500mAh LED (one of the three power display LEDs) will stop and others will go away. 2) When battery is inserted and detected, 4 LED charge indicator for the channel will open on taking which 3.7V battery type LED keeps flashing indicating to the battery type, if no operation in 5 seconds, it will start by automatic detection (Li -Ion 3.7V or NIMH) then four LED displays will show the charge status. 3) During the charging process, short-press the mode button to set the battery type within 5 seconds; 4) When no power is connected, insert a battery, it can quickly shows the remaining battery charger volume of the battery.

3. LED display graphic reference

technical specification

1. input: AC cable 110-240V 50 / 60Hz (included) / DC 12V 1A & # 65288; selective & # 65289;

2. Output voltage: 4.2V DC for 3.7V Li-Ion

DC 4.35 V for Li-Ion 3.8 V (IMR)

DC 3.65 V for LeFePO4

DC 1.48 V for NiMH / NI-Cd

3. Output current: Li-ion / IMR / LiFePO4 2000mA * 1 (only for slot # 4),

1000mA * 2, 500mA * 3 500mA * 4

NiMH / NiCd: 1000mA * 2, 500mA * 3 500mA * 4

4. Constant voltage, cut-off current: less than 100mA

5. Standby current: less than 15mA

Compatible battery types and sizes

li-ion / IMR / LiFePO4: 26650 & # 65292; 21700 & # 65292; 20700, 18650, 18490, 18350, 17670, 17500, 16340 (RCR123), 14500, 10440

NiMH / Cd: AA, AAA & # 65292; SC, C

size:

133mm x 100mm x 35mm (L x W x H)

Lii-S1 List:

Liitokala Lii-S1 Chargerx1

USB cable x1

Manual x1

Note: Does not include the battery

LiitoKala Lii-S1

Technology once again innovation, Auto-polarity detection. Do not need to distinguish the battery polarity. As long as the battery is rechargeable battery that can be charged. Do not worry about battery polarity reverse.Good Charger.

In addition to Auto-polarity detection there is a strong visible digi-dispaly. Visually beautiful. Function continues the Lii-100, very good.

Specifications

Input: Micro USB DC 5V / 1A (min.)

Output voltage: DC 4.2V 500mA / 1000mA for Li-Ion

DC 4.35V 500mA / 1000mA for IMR

DC 3.65V 500mA / 1000mA for LeFePO4

DC 1.48V 500mA / 1000mA for NiMH / NI-Cd

Constant voltage charging with cut-off current less then 100mA

Standby current: No more than 15mA

Compatible for Batteries:

Li-ion / IMR / LiFePO4: 26650, 21700,20700, 18650, 18490, 17700, 17500, 16340 (RCR123), 14500, 10440

Ni-MH / Cd: AA, AAA, A, SC, C size

Size (mm) / Weight (grams):

Length 112mm x Width 37mm x Height 32mm

45 grams (charger) + 17grams (USB cable) included in delivery

Features:

1, One-slot charging and management system, Micro USB DC 5V input port

2, Battery polarity auto-detection (Any Polarity)

3, 500mAh / 1000mAh charging current for selection

4, Built-in digital tube indicator shows the real-time charging status of voltage and current

5, Identify Li-ion and Ni-MH battery automatically

Select manually by short-press the mode button for IMR battery (3.85V Li-ion) and LiFePO4 battery (3.2V)

6, Activation function for 0V battery of PCM protection.

7, Can not charge battery with 0.0U 0.2V for NiMH / Cd and 1.6U 2.2V for Li-Ion

8, Over-charging and over-discharge protection

9, Identify broken / defective battery

10, Charging under constant voltage and current

Operation instruction:

There\'s a \'MODE\' button for choosing the battery types and charging current

Long press the \'MODE\' button for 3 seconds to change the charging current, you can change the charging current at any time

Short press the \'MODE\' button to change the charging types of lithium batteries. If no setting, it will default as 1.2V Ni-MH or 3.7V li-ion battery automatically. You need to change the mode for 3.85V li-ion and 3.2V LiFePO4 battery

It begins to charge the battery 5 seconds after your settings

When the battery is inserted or defective battery is inserted, the charger will have no any response showing "null" ; When the battery is fully charged, it shows "Full"

It can display the battery voltage and charge current by short press the \'MODE\' button at any time during charging

1. WORLDWIDE. (Except some countries and APO / FPO)2. Orders processed timely after payment verification.3. We only ship to confirmed order addresses. Your order address MUST CORRESPOND TO your Shipping address.4. The pictures shown are not the actual item and are just for your reference.5. TRANSFER TIME SERVICE is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season.6. If you have not received your shipment within the estimated days from the payment, please contact us. We will follow the dispatch and get backto you as soon as possible with a reply. Our goal is customer satisfaction!7. Due to differences in status and stock of the time, we will choose to ship your item from our first available warehouse for fast delivery.
1. Limited warranty on defective items (excluding items damaged and / or poorly upon receipt). Accessories come with a warranty. 2. Defective items MUST be reported and returned within the warranty period (and in the original packaging if possible). You must tell us what the defect is and give us your order number. WE DO NOT REPAIR OR REPLACE ITEMS WITH AN EXPIRED WARRANTY. You agree to all above-policy items listed after ordering on aliexpress!
1. All items MUST be returned in the original packaging and you MUST provide us with shipping tracking number, specific reason for return, and your order. 2. WE WILL RETURN YOUR FULL VALUE OF THE WINNER, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER Buyer and Seller cancel the aliexpress transaction. OR, you may choose to have a substitute. 3. We will bear all shipping costs if the product (s) is (are) not as advertised.